ICEK 8060-T6

COM Express Type 6 Starter-Kit Integrated COM Express Compact or Basic Module Bootable mini-SATA/ CFast-SSD on ICEB8060 with 10.4” LCD and Flex-ATX 110/220V AC input
  • Main Feature
  • COM Express Type 6, COM.0, Rev2.0 Evaluation Starter-Kit
  • COM Express Compact or Basic Modules with passive or active fan-sink
  • Bootable mini-SATA/ CFast-SSD with 10.4” LCD/ 18-bit LVDS Display
  • PCIex16, PCIex4, 2x PCIex1, 1x PEG/ DDI/ SDVO and mini-PCIe for Wi-Fi
  • 3xDDI/ 4xUSB3.0/ 2x SATA3.0/ 6x COM/ VGA/ LVDS/ 2x GbE/ 5.1 Audio S/PDIF
  • Integrated Flex-ATX PSU for AC 110/220V Input
Add to Inquiry
Datasheet(PDF)
Form factor Rugged Plastic (HDPE) Suitcase dimension: 47x 42x 12 cm3 Integrated ICEB 8060 Type 2, Carrier CRB for COM Express Basic Module
Display 10.4” AUO, G104SN03 V5
Expansion 1x PCIex16 (Gen 3.0) slot, 1x PEG/ DDI (port B for SDVO/ EBKA2- HDMI) 1x PCIex4 slot, 2x PCIex1 slot and 1x mini-PCIe slot for Wi-Fi with optional SIM tray
Graphic Interfaces CRT: support analog VGA with DB15 connector on the I/O edge LVDS: dual channels 18/24-bit LVDS connector (dual DF-13-20P)
Super I/O iTE IT8783
I/O Interface Serial COM: 6 ports
– 1x edge DB9 connector to support RS232/ 422/ 485 (+5/ +12V by Ring)
– 5x internal box-header 2.0 pitch to support RS232
USB 3.0/ 2.0: 8 ports
– 4x USB 3.0/ USB2.0 ports by stack Type A on edge
– 3x USB 2.0 by 4pins JST 2.0mm header connector
– 1x internal USB 2.0 to mini-PCIe slot for external wi-fi module
SATA 2.0: 4 ports
– 2x SATA 3.0/ SATA 2.0 ports
– 1x mini-SATA by mini-PCIe slot for half-/ full size mSATA-SSD
– 1x CFast slot for CFast-SSD/ SATA 2.0
PS/2: 2x 4pins header for Keyboard/ Mouse GPIO ports: 2x + 8x pins header GPIO from COMe (default 5V TTL/ option 3.3V)
Network ETH0: LAN chip: from COMe CPU module ETH1: 2nd. RJ45/ GbE port by Intel 82574L Support total 2x RJ45/ GbE ports on the edge I/O
Audio HD Audio AL886 with 5.1 channels Support external S/PDIF interface Support internal pin-header for L/R speaker-out 2W/ 4 Ohm
EEPROM 1x 2K EEPROM to record PCI Express Lane configuration ATMEL AT24C32 (or C02) and address 0x57 or (0xAE)
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% temperature 25°C)
On-board RTC On-chip RTC with battery BR2032
Power Input Build-in AC 110/ 220V Input for Flex-ATX PSU in this Starter-Kit
Add to Inquiry
Take a minute and tell us what you think!