ACES 3354

SMARC, TI Sitara AM3354, ARM® Cortex™ A8, 512MB DDR3, 4GB eMMC, 24-bit LVDS/ TTL, GbE, USB, USB-OTG, UART, GPIO
  • Main Feature
  • TI-AM3354, ARM® Cortex® A8 up to 720MHz
  • Graphic accelerator SGX530
  • Onboard 512MB DDR3, 4GB eMMC
  • Single channel LVDS/ TTL 24-bit Display interface
  • Gigabit Ethernet, USB, USB-OTG, SDIO, 2UART, SPI, DCAN, I2S, 3x I2C and 8x GPIO
  • SMARC STD 1.0 compliance with MXM3.0/314pins, 82 x 50mm
Add to Inquiry
Form factor SMARC STD 1.0 compliance with MXM3.0/314pins, 82 x 50mm
Processor Build-in Texas Instruments AM3354 ZCZ 324-pin PBGA Cortex™ A8 up to 720MHz
Power Management IC PMIC TPS65910A3 integrated w/ 4 DC/DCs, 8 LDOs and RTC in 6x6mm QFN
System Memory SDRAM: DDR3 512MB Flash: eMMC 4GB SPI Flash: 8Mbit
Multimedia Graphic Accelerator: SGX530 Display Interfaces:
- LVDS: Default 800 x 480 (24bit) for 7" LCD/ LVDS
- TTL: Reserved design interface for resolution up to 1024x 768@60Hz
Audio: I2S
Connectivity Network: 1x EMAC 10/100/1000 RGMII Ethernet interface USB#0: Added onboard USB Hub GENESYS: GL850G for 2x USB 2.0 Host USB#1: USB-OTG SDIO: up to 2x MMC/ SD UART: (TX, RX, CTS#, RTS#) 1x for Debug SPI: One Serial Peripheral Interface (SPI) interfaces I2C: two Inter-Integrated circuit interfaces General Purpose I/O: 8x GPIO signals DCAN: Dual CAN interfaces support bitrates up to 1 Mbit/s CAN 2.0B protocol.
- Logic level signals from Module based CAN bus protocol controllers
- RXD, TXD only
- Two module GPIOs reserved for optional use as CAN bus error status
Watchdog timer interface
Boot Source Select Module SPI flash Module eMMC flash Carrier SD card
System Environment Power Input: 5VDC ±5% ( supply by ULP-COM/ MXM3.0 interface) Power Consumption: DC + 5V/ 0.4A typical 2W to 6W during active operation Dimensions: 82 x 50mm Environment
- Module operating temperatures: 0°C to 60°C
- Storage temperature: -20°C to 85°C
- Relative humidity: 10% to 90%, (Non-condensing)
Certifications: Meet CE/ FCC class A
Add to Inquiry
Take a minute and tell us what you think!