|
CPU Support
|
Support Intel® Atom™ N270 1.6GHz processor with 533MHz FSB
|
|
Main Memory
|
1 x 200-pin SO-DIMM socket, up to 2GB non-ECC 400/ 533 DDR2 memory
|
|
Chipset
|
Intel® 82945GSE Graphic Controller Hub (GMCH)
Intel® 82801 GBM ICH7 Mobile (ICH7-M)
|
|
BIOS
|
Award system BIOS
Plug & Play support
Advanced Power Management
Advanced Configuration & Power Interface
8M bits SPI ROM
|
|
On-board LAN
|
2 x Realtek RTL8111C-GR PCI Express Gigabit Ethernet
Support Boot From LAN (PXE)
2 x RJ45 with LED
|
|
Display
|
Intel® 945GSE integrated 3D graphics engine, based on Intel®GMA950 architecture, delivers sophisticated graphics for large display application, dual independent display support, at graphics core speeds up to 166MHz, provides a wealth of options for high-resolution displays
Analog VGA interface: 1 x DB15 VGA port Resolution up to 1600 x 1200 at 85 Hz, 2048x1536 at 75Hz
LVDS interface: SDVO w/ CH7308B single/dual LVDS transmitter to single (24bit) or dual pixel (48bit) LVDS panel, resolution up to 1600 x 1200, 2 x DF13 20-pin LVDS connector for internal connection
CCFL interface: 1 x CCFL for LCD Panel Backlight Inverter
|
|
Audio
|
Realtek ALC888 CODEC for High Definition
1 x Mic-in and 1 x Line-out Pin header
|
|
Expansion
|
1 x Mini-PCIe
|
|
I/O Interface
|
Serial port: 3 port, One DB9 Connector and Two 2 x 5 2.0mm box header serial
Parallel port: 1 x 26-pin box header
USB 2.0: 6 ports, 2 ports edge connector, 2 ports by 2.0mm JST connector, 2 ports by 2.0mm pin header
8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V)
On-board Power LED and HDD Active LED Pin Header
1 x 3-pin fan connector (for CPU)
1 x DB15 VGA connector
1 x Keyboard/Mouse pin header
On board Buzzer/SMBus2.0/Reset SW
|
|
Watchdog Timer
|
Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
|
|
Storage
|
1 x SATA port
1 x CF socket
|
|
System Monitor
|
Monitoring of 4 voltages and 2 temperatures
4 Voltage (Vcore, +12V , +3.3V , +1.5V)
2 Temperatures (CPU, System)
|
|
On-board RTC
|
On-chip RTC with battery backup
1 x External Li-Ion battery
|
|
Power Input
|
Support AT and ATX mode
|
|
Power Requirements
|
Power requirement: +12V DC Input
One 4-pin power connector
|
|
Dimensions
|
3.5" ECX form factor/ 146mm (L) x 105mm (W) (5.7"x4.1")
|
|
Environment
|
Operating temperatures: 0°C to 60°C
Storage temperature: -20°C to 85°C
Relative humidity: Operating 10% to 90%, non-condensing
|
|
Certifications
|
CE approval
FCC Class A
|