Specifications
| CPU Support | - Single Micro-FCPGA Socket 478
- Supports Intel® Pentium® M processor up to 1.7 GHz with 1 MB L2 Cache, 400 MHz FSB
- Supports Intel® Pentium® M processor up to 2.0 GHz with 2 MB L2 Cache, 400 MHz FSB
- Supports Intel® Celeron® M processor from 600 MHz up to 1.5 GHz with 512 KB on-die L2 Cache, 400 MHz FSB
- Optional on-board Intel® Micro-FCBGA 479-pin Pentium® M/ULV/LV Pentium® M processor
|
| Main Memory | - 2 x 184-pin DIMM sockets, up to 2 GB unbuffered DDR 200/266/333/400 SDRAM
- 855GME model supports ECC memory
- 852GM model does not support ECC memory
|
| Chipset | - Intel® 855GME Chipset For EBC 572(104), Intel® 852GM Chipset For EBC 572(104)-C65
- Intel® 82801 DB (ICH4)
|
| BIOS | - Award System BIOS
- Plug & Play support
- ACPI 1.0b compliant
- 4 Mbit fl ash ROM
|
| On-board LAN | - 1 x Intel® 82551QM 10/100 Fast Ethernet LAN
- 1 x Intel® 82562EM 10/100 Fast Ethernet LAN
|
| Display | - Intel® 855GME/852GM chipset integrated with graphics controller
- Up to 64 MB of dynamic video memory
- Hardware motion compensation assist for software MPEG/DVD decoder
- VGA: 2.0 mm pin header for CRT output
- LVDS: DF13-20DP, 2 x 20-pin connector, support 18/24-bit single pixel or 18-bit dual pixel LVDS panel
|
| I/O Interface | - Serial port: 1 x 40-pin header, supports 4 x 16C550 UARTs (3 x RS232 + 1 x RS232/422/485)
- USB: 4 ports, with 1x6 JST (2.0 mm)
- LAN: 2 x 10/100 Ethernet LAN (180 degree. Optional 90 degree RJ45 connector by request)
- HDD: Ultra ATA 100/66/33 support, 1 x 40-pin connector
- 1 x CompactFlash socket
- Parallel port: bi-directional, EPP/ECP support, 1 x 26-pin box header
- FDD: 1 x slim type connector
- PS2:1 x 6-pin JST (2.0mm)
- Audio: ICH4 supports AC’97, optional EBK AC'97 supports Line-in, Mic-in, Speaker-out
- Digital I/O: 4-bit TTL input, 4-bit TTL output (+3.3 V)
- On-board buzzer / SMBus 2.0 controller / Reset Switch / IDE active LED
- ATX Power Switch: 3 x 2-pin header
|
| On-board RTC | - On-chip RTC with battery back up
- 1 x External Li-Lon battery
|
| Storage | - HDD: 1 x 40-pin IDE connector (Secondary)
|
| System Monitor | - Derived from super I/O to support system voltage, fan speed, temperature monitoring
|
| Power Input | - 20-pin ATX, power input connector
|
| Power Requirements | - Pentium-M 1.6 GHz: +12 V, +5 V, 3.3V
- Full-Loading Mode: 0.1 A, 5.15 A, 0.5 A
- NOTE: 1. 5VSB is depending on standby power require. 2. Full Loading: Utilize CPU 100% with Burn-in test running.
|
| Dimensions | - 5.25" form factor, 203 mm(L) x 146 mm (W) (7.9" x 5.7")
|
| Environment | - Board-level operating temperature: -20°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |