|
Computer-On-Modules
ICES 102
Intel® Pentium® M/ Celeron® M CPU ETX Module with LVDS Interface
Main Features
- Low Power ETX CPU Module
- Supports Intel® Pentium® M/ Celeron® Processor
- Intel® 852GM Chipset
- Supports 200/266 SO-DIMM up to 1GB
- Intel® 82562GZ 10/100 Ethernet Controller
- VIA VT1613G CODEC, AC’ 97 Audio Interface
- Supports LVDS Interface
- Supports DVO Interface
Specifications
| CPU Support | - Intel® Celeron® M processor
- Intel® Pentium® M processor
- Supports 400 MHz FSB CPU only
| | Main Memory | - Supports one unbuffered non-ECC DDR SO-DIMM 200/266 up to 1 GB
| | Chipset | - Intel® 852GM + ICH-4 chipset
| | BIOS | - Award System BIOS
- Advanced Power Management support
- 4 Mbit fl ash ROM
- Supports Boot from USB-CDROM and Boot From CF Card (Industry grade bootable CF Card)
| | On-board LAN | - Intel 82562GZ 10/100 Fast Ethernet
- Supports PXE LAN boot function
- Signals down to I/O Board
| | Display | - Intel® 852GM integrated graphics solution up to 64 MB of dynamic video memory allocation drives a standard progressive scan analog monitor with pixel resolution up to 1600 x 1200 at 85 Hz
- Wide screen resolution support for 852 x 480 and 1366 x 768 reolution
- Single or dual pixel LVDS panel support
- Supports CRTs up to 1920 x 1440 x 32 bpp at 85 Hz
| | Super I/O | | | ETX Connector | - X1: 4 x 32-bit/33 MHz PCI, VIA VT1613G Codec - AC'97 Audio Interface, 4 x USB 2.0
- X2: ISA Interface (full function)
- X3: 1 x VGA, 1 x LVDS (dual pixel), 1 x Parallel port, 1 x KB/Mouse, COM1 and COM2, 1 x IrDA
- X4: 1 x Ethernet (10/100), SMBus/I2C, 2 x IDE
| | Power Requirements | - +5 V power only, follows ETX power and ground pin definitons
- Supports both AT and ATX power mode
| | Dimensions | - 95 mm (W) x 114 mm (L) (3.74" x 4.5")
| | Environment | - Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: Operating 10% - 90%, non-condensing; Non-operating 5% - 95% (non-condensing)
| | Certifications | |
|