Specifications
| CPU Support | - VIA Eden™/C7 with V4bus@400 MHZ Processors support CPU Speed from 400 MHZ ~ 1.5 GHZ
|
| Main Memory | - 1 x 184-pin DIMM Socket, up to 1GB un-buffered non-ECC DDR 333/400 SDRAM
|
| Chipset | |
| BIOS | - AWARD system BIOS
- 4 Mbit Flash ROM
|
| On-board LAN | - 3 x Realtek RTL8139C+ (L)10/100 Fast Ethernet Controller
- Supports PXE LAN boot ROM for Ethernet Boot up
- Supports Wake on LAN (LAN 1 only)
- Interface: 3 x RJ45 connector
|
| Display | - VIA CN700 Integrated UniChrome Pro 3D/2D Graphics & Video Controller Supports 16/32/64 MB Frame Buffers size 64 MB VGA shared memory
- Analog VGA Interface:1 x DB-15 connector for CRT, supports max resolution 1600 x 1200 at 85 Hz
|
| Audio | - AC'97 Interface: one 2x5-pin header ( for NEXCOM EBK AC97)
|
| I/O interface | - USB 2.0: 6 x USB2.0, with1x6 JST(2.0mm)
- Serial ports: 2 x ports, with DB9, 2x5-pin header
- Parallel ports: 2x13-box header(2.0mm), Bi-directional, EPP/ECP
- PS/2: 1 x external Mini-Din ( or internal 2x4-pin header) for Keyboard/Mouse
- GPIO: 8 GPIO lines via header (4 IN and 4 Out ); TTL Level (0/5V)
- FAN: 3 x FAN WAFER connector for CPU and Chassis
- IrDA: 1 x pin header for IrDA,TX,RX
- I2C: 1 x pin header
- 1 x on board buzzer
- 1 x 2-pin header for reset
- 1 x 2-pin header for ATX power switch
- 3-pin JST for the optional Power ( 5Vsb, PS_ON, GND ) Input
|
| Storage | - 2 x SATA ports, support RAID 0,1
- 1 x IDE 44-pin connector, support Ultra ATA 33/66/100
- 1 x CF internal socket
|
| Expansion | - 1 x PCI slot ( support up to 2 x PCI devices )
|
| Watchdog Timer | - Watchdog Timer is programmable by software from 1 to 64
|
| On-board RTC | - On chip RTC with battery back up
- 1 x External Li-ion Battery
|
| Power Input | - Supports both AT and ATX Mode (Factory default setting is AT mode): 1 x 3-pin header for AT/ATX mode switch, +3.3V is converted from +5V, 1 x Power Input Connector, 1 x Jst connector to receive the 5Vsb input from Power Source
- AT Mode: Power Required:+5V/+12V (No Power On push Button, No Software Shutdown function and LAN1 remote wake up)
- ATX Mode: Power Required:+5V/+12V/-12V/-5V/5Vsb Power In Support Power On push Button, Software Shutdown function and LAN1 remote wake up only, 2-Pin Header for Power On Push Button
|
| Power Consumption: | - CPU : On Board VIA Eden (Source #2) 800MHz Memory : 1 x DDR 256MB:+12V +5V; Full-Loading Mode:0.70A 3.19A; Light-Loading Mode:0.74A 2.90A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running. 2.Light Loading: Utilize CPU loading below 5% without application running
|
| Dimensions | - 5.25" form factor, 203 mm (L) x 146 mm (W) (7.9" x 5.7")
|
| Environment | - Board level operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |