Embedded Computing
Print Email

EBC 301(w/ EBK 301-C1 & C2)

3.5" Pentium® M/Celeron® M Embedded CPU board with Gigabit LAN

Main Features
  • 3.5 ECX Form Factor
  • Intel Pentium® M/ Celeron® M Procesors
  • Intel® 910GMLE or 915GME Chipset
  • On-board Default 512 MB DDR2 Memory
  • Max. Support up to 1GB by Manufacture Option
  • Single +5V AT Mode Power Input Design
  • Supports LVDS/ CRT Dual Independent Display
  • Realtek 8111C-GR PCI Express GbE Controller
  • Supports Both ATX or AT Power Mode
  • ECX Multi I/O Expansion for Add-on Modules
enlarge
Specifications
CPU Support
  • Support Intel® Pentium® M processor or Intel® Celeron® M processor in PGA and BGA Type
Main Memory
  • On-board default 512 MB DDR2 Memory
  • Max. Support up to 1GB by Manufacture Option
Chipset
  • Intel® 910GMLE chipset (compatible with 915GME chipset)
  • Intel® ICH6M (82801FBM)
BIOS
  • Award System BIOS
  • Advanced Power Management support
  • 4M bits fl ash ROM
  • Only support Software Shutdown by 5Vsb Provided (S0 /S5 only)
On-board LAN
  • Realtek 8111C-GR PCI Express GbE controller
  • 1 x RJ45 with LED connecter
  • Support PXE LAN boot ROM for Ethernet Boot up.
  • Support Wake on LAN (By 5Vsb Provided)
Display
  • Intel® 910GMLE (915GME) integrated graphics solution w/ Intel® Extreme Graphics 2 technology, Intel® DVMT video memory allocation
  • Analog VGA Interface:1 x DB15 VGA port, 350-MHz integrated 24-bit RAMDAC that can drive a standard progressive scan analog monitor with pixel resolution up to 1600x1200 at 85 Hz, 2048x1536@75Hz
  • LVDS Interface:DF13 20-pin LVDS connector for internal connection, supports single (18bit/24bit)LVDS panel
  • DVI Interface:Through MIO module EBK301-C1 via SDVO interface
  • CCFL Interface:One CCFL 7-pin 2.5mm Jst connector for LCD Backlight Inverter Power Control
I/O Interface
  • Serial port: Two ports, One DB-9 Connector and one 2 x 5 2.0mm box header
  • USB 2.0: 4 ports, 2 ports edge connector, 2 ports by 6-pin 2.0mm Jst connector.
  • 8 GPIO:10-pin(2 x 5) 2.0mm header (GPI 0~3 and GPO0~3), TTL Level (0/5 V)
  • One 1 x2 2.54mm thermal sensor pin
  • 3-pin Fan connector, adjustable by jumper for +12V or +5V(Manufacture Default)
  • 2-pin header (2.54mm) for Buzzer. Reset switch, Power LED, HDD LED and ATX mode power-on Push Button
  • 2X5 10-pin Power Input connector.
  • 1 x DB15 VGA port
  • 1 x RJ45 LAN connector
  • 1 x RJ45 LAN connector
  • One EBK Multi I/O connector for the expansion modules through following reserved interface:USB x4/LPC x1/PCI (Master) x2/AC97 Audio Codec Interfacex1/PCI Express x1/SDVOInterfacex1/PCI Express x1/SDVO
On Board RTC
  • On chip RTC with battery back up
  • External Li-Lon Battery
Storage
  • 1 X SATA Connector
  • CF socket support through optional module EBK 301-C2
System Monitor
  • 3 voltage: +3.3V, +5V, Vcore
  • 2 Temperatures: CPU, System
  • 1 FANs speed: CPU FANs
Watchdog Timer
  • Watchdog timert is programmable by Software from 1 mins to 255 mins or 1 sec. to 255 sec. , (Tolerance 15% under room temp. 25°C)
Power Requirements
  • AT Mode: Single 5V input, CPU:P-M 2.0G Memory: On board DDR2 1GB:+5V; Full-Loading Mode: 4A; Light loading Mode: 3A
  • ATX Mode:Aux input connector for +5Vsb, +12V, -12V, -5V as ATX mode application. Support Remote Power ON / Software Shutdown / RTC alarm When ATX mode
Dimensions
  • 3.5" form factor / 146 mm (L) x 105 mm (W) (5.7" x 4.1")
Certifications
  • CE approval
  • FCC Class A
Environement
  • Operating Temp: -20˚C to 60˚C for Board Level Only
  • Storage Temp.: -20˚C to 85˚C
  • Relative Humidity : Operating 10%~90%, non-condensing
  • Non-operating 5%~95%, non-condensing
Top