Specifications
| CPU Support | - Intel® Socket M
- Supports Intel® Core™ 2 Duo, Core™ Duo,Core™ Solo family processors with 533/667 MHz
- Intel® Embedded Processor List (Intel® Longevity CPU): Core™ 2 Duo Processor (T7400), Core™ Duo Processor (T2500), Core™ Solo Processor (Celeron® M 440)
|
| Main Memory | - 2 x 240-pin DDR2 DIMM socket, up to 4GB un-buffered non-ECC DDR2 533/667 SDRAM
- Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation.
|
| Chipset | - Intel® 945GME Graphics Memory Controller Hub (GMCH)
- Intel® 82801 GHM ICH7 Mobile Digital Home (ICH7-M DH)
|
| BIOS | - Award system BIOS
- Supports Soft off, Wake on LAN, Power On by PS2 Keyboard Function Key, RTC alarm Power On
- Power on after power failure
- Plug & Play support
- 4M bits fl ash ROM
|
| On-board LAN | - 2 x Intel® 82573L PCI Express Gigabit Ethernet
- Supports Boot From LAN (PXE)
- Supports Wake on LAN (When 5Vsb power available)(LAN1 only)
- 2 x RJ45 with LED
|
| Display | - Intel® 945GME chipset with integrated graphics controller, Max. 128MB by Intel Dynamic Video Memory Technology (DVMT) 3.0
- Analog VGA interface:1 x DB15 VGA connector Resolution up to 1400X1050 (Tested); Chipset support up to 2048 x 1536
- LVDS interface: 2 x DF13 20-pin LVDS connector for internal connection, Single (18bit) or dual pixel (36bit) LVDS panel
- CCFL interface: 1 x CCFL for LCD Panel Backlight Inverter
|
| Audio | - Realtek ALC655 CODEC for AC97 v2.1 CODECl
- Interface: Mic in and Speaker out connector, Line in with pin header
|
| Expansion | - 1 x PCIe x16 slot
- 1 x PCI slot
|
| I/O Interface | - USB 2.0: 2 ports connector on front
- USB 2.0: 4 ports, with 1x6 JST (2.5 mm )
- Serial ports: 4 x SIO, with 2x20 box header (2.0 mm)support RS-232 only 1 x jumper to switch 5V and 12V power source
- Parallel port: 1 port, with 2x13 box-header (2.0 mm)
- PS/2: 1 x Mini-Din Keyboard/Mouse
- GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface
- FAN: 3x 3-pin FAN connector (one for CPU, two for system)
- 1 x on-board 5-pin header for IrDA,TX,RX
- On-board buzzer /SMBus2.0 / Reset / On off switch button
|
| Watchdog Timer | - Watchdog Timer is programmable by software from 1 to 255 seconds (Tolerance 10% under room temperature 25°C)
|
| Storage | - CF: 1x Internal CompactFlash socket
- Supports One Type I& II Compact Flash Card (Primary Master)
- 2 ports SATA II
- IDE: 1 x 44-pin IDE connector
|
| System Monitor | - 5 voltage (For +3.3V, +5V, +12V, Vcore and +2.5V)
- 3 Temperatures (CPU, two external Temperature Sensor)
- 3 FANs speed (CPU and System FANs)
|
| On-board RTC | - On-chip RTC with battery back up
- 1 x External Li-ion Battery
- RTC Tolerance less than 2sec (24 hours) under 25˚C environment
|
| Power Requirements | - Supports both AT and ATX Mode (Factory default setting is AT mode)
- CPU: P-M 2.17GHz, Memory: 2 x 1G DDR2(+12 V, +5 V)
- Full-Loading Mode: 3.25 A, 4.97 A
- Light-Loading Mode: 0.40 A, 2.97 A
- NOTE: 1. Full Loading: Utilize CPU 100% with Burn-in test running. 2. Light Loading: Utilize CPU loading below 5% without data or application running.
|
| Dimensions | - 5.25" form factor: 203 mm (L) x 146 mm (W) (7.9" x 5.7")
|
| Environment | - Board level operating temperature:0°C to 60°C
- Storage temperature:-20°C to 80°C
- Relative humidity: 10% to 90% (Non-condensing)
|
| Certifications | |